Extron-electronic RSB 126 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 30
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
SW USB Series • Installation
Installation, cont’d
2-4
SW USB Series • Installation
2-5
Use 2 mounting holes on
opposite corners.
(2) 4-40 x 3/16"
Screws
1U Universal Rack Shelf
Front false
faceplate
uses 2
screws.
HalfRackVersaToolsStandardShelf
1/2 Rack Width Front False
Faceplate
3
2
4
Mounting an SW USB switcher on a standard 9.5-inch
deep rack shelf
Furniture mounting
To mount the SW USB switcher under a desk, table, or podium,
use the optional MBU 123 VersaTools Mini Under-Desk
Mounting Kit (part #70-212-01), as follows:
1. If rubber feet were previously attached to the bottom of the
unit, remove them.
2. Remove the two screws from one side of the SW USB.
Retain the screws for possible later reassembly.
3. Attach one bracket to the side of the unit, using the
provided machine screws.
4. Circuit overloading — When connecting the equipment
to the supply circuit, consider the effect that circuit
overloading might have on overcurrent protection and
supply wiring. Consider equipment nameplate ratings
when addressing this concern.
5. Reliable earthing (grounding) — Maintain reliable
grounding of rack-mounted equipment. Pay particular
attention to supply connections other than direct
connections to the branch circuit (e.g., use of power strips).
Rack mounting procedure
1. If feet were previously attached to the bottom of the
switcher, remove them.
2. Mount the SW USB Series switcher on the rack shelf, using
two 4-40 x 3/16" screws in opposite (diagonal) corners to
secure the unit to the shelf (see the gures below and on
the next page).
3. Install blank panel(s) or other unit(s) on the rack shelf as
desired.
4. Install the shelf in the rack.
The following illustrations show examples of how the SW USB
can be mounted on different sized rack shelves.
HalfRackVersaToolsShelf
(2) 4-40 x 3/16"
Screws
Use 2 mounting holes on
opposite corners.
VersaTools Rack Shelf
1/2 Rack Width Front
False Faceplate
2
3
4
Mounting an SW USB switcher on a 3.5-inch deep
VersaTools rack shelf
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Comments to this Manuals

No comments