Extron electronic Extron Electronics TV Mount USFM 100 User Manual

1The Extron USFM 100 is a mounting kit for suspending ultra short throw projectors from a wall. The USFM 100 base plate enclosure is capable of mounti

2InstallationWARNING: Before commencing installation, the wall structure must be examined to determine if it is suitable for the proper installation

3For drywall with wood studsi. Drill ¼ inch pilot holes at the marked stud locations.ii. Align the base plate mounting holes over the pilot holes an

43. Run CablesNOTE: All cable installation should be performed in accordance with local and national building codes, fire and safety codes, and local

55. Attach the Boom Arm, Power Supply, and Projectora. Hook the boom arm over the top rail on the base plate so that the tab on the arm (see figure 6,

66. Complete the Installationa. Switch on the display device, control device, and signal sources, and configure the system. Adjust the position and le

734.40"(87.38 cm)2.20"(5.59 cm)31.80"(80.77 cm)3.60"(9.14 cm)3.85"(9.77 cm)11.82"(30.02 cm)1.25"(3.18 cm)Base Plate

8USFM 100 Installation Guide, cont'd68-1838-01 Rev B05 1131.80" (max)(80.77 cm)30.00" (max)(76.20 cm)3.71"(9.42 cm)3.22” - 5.22&qu